Scaffolding Safety and Inspection
Build practical competence in scaffold components, safe erection, tagging, load limits and inspection checkpoints for work at height.
PROFESSIONAL LEARNING
Course Catalogue
Every HSE Lead programme — safety, environmental, work at height, ISO and inspection. Choose a course, enrol, and study at your own pace with verifiable certification.
Working at Heights & Fall Protection
Control fall hazards using anchor, restraint and arrest systems, safe access planning and rescue readiness.
Rigging and Slinging Safety
Select and inspect slings, shackles and accessories, estimate loads and apply safe rigging and signalling practice.
Lifting Equipment Inspection
Examine cranes, hoists and lifting accessories, classify defects and record thorough-examination findings.
Lifting Supervisor
Plan and supervise lifting operations, control crane zones, signalling and exclusion, and manage lift-plan risk.
Confined Space Entry and Rescue
Apply atmospheric testing, isolation, permits, attendant duties and emergency rescue for confined-space work.
Control of Substances Hazardous to Health (COSHH)
Assess hazardous substances, exposure controls, storage, labelling and health surveillance under COSHH.
Personal Protective Equipment (PPE) Selection and Inspection
Select, fit, inspect and maintain PPE appropriate to the hazards present and record its serviceability.
Hazard Identification and Risk Assessment (HIRA)
Use structured HIRA methods to identify hazards, assess likelihood and severity and select effective controls.
Authorized Gas Tester (AGT)
Perform atmospheric gas testing, interpret readings and authorise safe entry and hot work in hazardous areas.
Electrical Safety & Lock-Out Tag-Out (LOTO)
Apply electrical hazard controls, energy isolation, zero-energy verification and controlled return to service.
Construction Site Safety Officer Training
Develop the competence to plan, monitor and enforce health and safety across a construction site.
ISO 45001 Internal/Lead Auditor
Plan, conduct, report and follow up occupational health and safety audits using ISO 45001 and ISO 19011.
ISO 14001
Audit environmental aspects, compliance obligations and operational controls against ISO 14001.
Incident Investigation and Root Cause Analysis
Collect evidence, interview witnesses, map causal factors and develop corrective actions that prevent recurrence.
Heavy Machinery & Plant Operation Safety
Operate and supervise heavy plant safely with pre-use checks, exclusion zones, banksman control and site rules.
Fire Safety and Fire Marshal Training
Recognise fire classes and ignition sources, select extinguishers and coordinate evacuation and marshalling duties.
First Aid at Work (FAW)
Provide emergency and primary first aid at work, manage casualties and maintain workplace first-aid arrangements.
Asbestos Awareness
Recognise asbestos-containing materials, understand exposure risks and apply avoidance and reporting procedures.
Excavation and Trenching Safety
Control excavation hazards through shoring, access, spoil management, services checks and inspection.
Manual Handling Training
Assess and reduce manual-handling risk using safe lifting techniques, ergonomics and mechanical aids.
Noise and Vibration Awareness
Assess noise and hand-arm and whole-body vibration exposure and apply controls and health surveillance.
Environmental Management and Waste Handling
Manage site environmental aspects, waste segregation, storage, spill control and legal compliance.
Site Management Safety Training Scheme (SMSTS)
Equip site managers to plan, deliver and monitor health, safety, welfare and environmental controls on site.
Traffic Management and Vehicle Banksman
Plan site traffic routes and apply banksman signalling to separate pedestrians and vehicles safely.
Crane Operator Safety Training
Operate cranes safely with pre-use inspection, load charts, signalling and exclusion-zone control.
Fall Rescue Training
Plan and perform prompt rescue of a fallen worker, addressing suspension trauma and safe recovery.
Ergonomics on Construction Sites
Identify ergonomic risk factors and design tasks, tools and workstations to reduce injury.
Emergency Response and Evacuation Planning
Develop and rehearse emergency response and evacuation plans, roles, alarms and assembly control.
Scaffolding Inspection
Inspect scaffolds against standards, verify tags, components and load class and record defects for action.
Fall Protection Tools Inspection
Examine harnesses, lanyards, anchors and arrest devices and document serviceability and rejection criteria.
Tools Calibration
Verify and record the calibration status of measuring and testing tools against traceable references.
Heavy Machinery & Plant Operation Safety
Inspect heavy plant condition, guards, controls and safety devices before and during operation.
Fire
Inspect fire detection, alarm and firefighting provisions for coverage, condition and emergency readiness.
Equipment Calibrations
Confirm and document the calibration of workplace equipment and instruments to maintain accuracy.
Asbestos
Survey and inspect for asbestos-containing materials and record condition, risk and required controls.
Excavation and Trenching Safety
Inspect excavations, shoring, access and spoil for stability and safe working conditions.
Mobile Elevating Work Platform (MEWP) Inspection
Inspect MEWPs for structural condition, controls, safety devices and thorough-examination status.
Tower and Mobile Crane Inspection
Examine tower and mobile cranes, structure, ropes, safety systems and certification status.
Forklift and Telehandler Inspection
Inspect forklifts and telehandlers for load systems, hydraulics, brakes and operational safety.
Earthmoving Machinery Inspection
Inspect excavators, loaders and dozers for structural, hydraulic and safety-system integrity.
Portable Appliance Testing (PAT)
Test and inspect portable electrical appliances for electrical safety and record pass or fail status.
Power Tools and Hand Tools Inspection
Inspect power and hand tools for guarding, condition, insulation and safe operating state.
Fall Arrest and Harness Equipment Inspection
Examine fall-arrest systems and harnesses against rejection criteria and record thorough examination.
Pressure Equipment and Compressor Inspection
Inspect pressure vessels, receivers and compressors for integrity, protection devices and compliance.
Gas Welding and Cutting Equipment Inspection
Inspect gas welding and cutting sets, hoses, regulators and flashback protection for safe use.
Temporary Power and Generator Inspection
Inspect temporary power distribution and generators for earthing, protection and safe connection.
Concrete Machinery and Pump Inspection
Inspect concrete pumps and machinery for hydraulic, structural and safety-device condition.
Trench Box and Shoring Equipment Inspection
Inspect trench boxes and shoring for integrity, correct assembly and safe support of excavations.
Falsework and Formwork Inspection
Inspect falsework and formwork for design compliance, stability, bracing and safe loading.
Fire Protection Equipment Inspection
Inspect fire protection equipment — extinguishers, hoses and systems — for condition and readiness.
Ladder and Stepladder Inspection
Inspect ladders and stepladders for defects, stability and compliance with safe-use criteria.
Lifting Accessories and Gear Inspection
Examine slings, shackles, hooks and lifting gear against rejection criteria and record examination.
ISO 9001 — Quality Management System
Understand, implement and audit the requirements of ISO 9001 for quality management and continual improvement.
ISO 14001 — Environmental Management System
Understand, implement and audit ISO 14001 for environmental aspects, compliance obligations and operational control.
ISO 45001 — Occupational Health and Safety Management System
Understand, implement and audit ISO 45001 for worker health and safety, risk control and participation.
ISO 27001 — Information Security Management System
Understand, implement and audit ISO/IEC 27001 for information-security risk treatment and Annex A controls.
ISO 50001 — Energy Management System
Understand, implement and audit ISO 50001 for energy performance, baselines and continual improvement.
ISO 22301 — Business Continuity Management System
Understand, implement and audit ISO 22301 for continuity strategies, response and recovery.
ISO 31000 — Risk Management Guidelines
Apply the ISO 31000 framework and process to identify, assess and treat organisational risk.
ISO 55001 — Asset Management System
Understand, implement and audit ISO 55001 for whole-life asset management and value realisation.
ISO 41001 — Facility Management System
Understand, implement and audit ISO 41001 for effective and efficient facility management.
ISO 37001 — Anti-Bribery Management System
Understand, implement and audit ISO 37001 controls to prevent, detect and address bribery.
ISO 28000 — Security Management Systems for the Supply Chain
Understand, implement and audit ISO 28000 for security and resilience across the supply chain.
ISO 13485 — Medical Devices Quality Management System
Understand, implement and audit ISO 13485 for medical-device quality and regulatory compliance.
ISO 22000 — Food Safety Management System
Understand, implement and audit ISO 22000 for food-safety hazards, prerequisite programmes and HACCP controls.
ISO/IEC 20000-1 — IT Service Management System
Understand, implement and audit ISO/IEC 20000-1 for IT service management and service delivery.
ISO/IEC 42001 — Artificial Intelligence Management System
Understand, implement and audit ISO/IEC 42001 for responsible and well-governed AI management.
ISO 26000 — Social Responsibility Guidelines
Apply ISO 26000 guidance on social responsibility, stakeholder engagement and ethical conduct.
ISO 44001 — Collaborative Business Relationship Management Systems
Understand, implement and audit ISO 44001 for effective collaborative business relationships.
ISO 56002 — Innovation Management System
Understand and apply ISO 56002 to establish, run and improve an innovation management system.
ISO/TS 16949 / IATF 16949 — Automotive Quality Management System
Understand, implement and audit IATF 16949 for automotive quality management and supplier requirements.
Environmental Awareness & Sustainability
Build practical competence in Environmental Awareness & Sustainability — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Environmental Aspects and Impacts Assessment
Build practical competence in Environmental Aspects and Impacts Assessment — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Environmental Legal Compliance & Permit Awareness
Build practical competence in Environmental Legal Compliance & Permit Awareness — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Spill Prevention, Control and Emergency Response
Build practical competence in Spill Prevention, Control and Emergency Response — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Hazardous Waste Management
Build practical competence in Hazardous Waste Management — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Waste Segregation, Recycling and Waste Minimization
Build practical competence in Waste Segregation, Recycling and Waste Minimization — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Oil and Chemical Spill Response
Build practical competence in Oil and Chemical Spill Response — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Air Pollution, Dust and Emission Control
Build practical competence in Air Pollution, Dust and Emission Control — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Water Pollution Prevention & Wastewater Management
Build practical competence in Water Pollution Prevention & Wastewater Management — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Soil and Groundwater Contamination Prevention
Build practical competence in Soil and Groundwater Contamination Prevention — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Noise Pollution and Community Impact Management
Build practical competence in Noise Pollution and Community Impact Management — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Energy Efficiency and Conservation Awareness
Build practical competence in Energy Efficiency and Conservation Awareness — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Climate Change & Greenhouse Gas Awareness
Build practical competence in Climate Change & Greenhouse Gas Awareness — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Carbon Footprint and GHG Management
Build practical competence in Carbon Footprint and GHG Management — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Sustainable Construction & Green Site Practices
Build practical competence in Sustainable Construction & Green Site Practices — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Biodiversity and Ecological Protection
Build practical competence in Biodiversity and Ecological Protection — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Environmental Incident Investigation
Build practical competence in Environmental Incident Investigation — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Environmental Monitoring, Inspection and Reporting
Build practical competence in Environmental Monitoring, Inspection and Reporting — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Environmental Emergency Preparedness
Build practical competence in Environmental Emergency Preparedness — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Resource Efficiency — Water, Energy and Materials
Build practical competence in Resource Efficiency — Water, Energy and Materials — legal duties, site controls, monitoring and reporting to recognised environmental standards.
Permit to Work (PTW) System
Permit to Work (PTW) System — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Hot Work Safety
Hot Work Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
H2S Awareness and Escape
H2S Awareness and Escape — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Hydrogen Sulphide Authorized Gas / H2S Safety
Hydrogen Sulphide Authorized Gas / H2S Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Chemical Handling and Chemical Safety
Chemical Handling and Chemical Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Chemical Spill Response
Chemical Spill Response — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Safety Data Sheet & GHS Hazard Communication
Safety Data Sheet & GHS Hazard Communication — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Heat Stress Prevention & Management
Heat Stress Prevention & Management — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Cold Stress Awareness
Cold Stress Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Hand and Finger Injury Prevention
Hand and Finger Injury Prevention — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Line of Fire Safety
Line of Fire Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Dropped Object Prevention — DROPS
Dropped Object Prevention — DROPS — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Slips, Trips and Falls Prevention
Slips, Trips and Falls Prevention — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Housekeeping and Workplace Safety
Housekeeping and Workplace Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Behaviour-Based Safety (BBS)
Behaviour-Based Safety (BBS) — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Safety Leadership for Supervisors
Safety Leadership for Supervisors — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Toolbox Talk & Safety Communication
Toolbox Talk & Safety Communication — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Job Safety Analysis / Job Hazard Analysis (JSA/JHA)
Job Safety Analysis / Job Hazard Analysis (JSA/JHA) — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Stop Work Authority
Stop Work Authority — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Near-Miss Reporting and Learning
Near-Miss Reporting and Learning — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Process Safety Management Awareness
Process Safety Management Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Contractor HSE Management
Contractor HSE Management — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Simultaneous Operations (SIMOPS) Safety
Simultaneous Operations (SIMOPS) Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Mechanical Isolation Safety
Mechanical Isolation Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Pressure Testing Safety
Pressure Testing Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Pneumatic and Hydraulic Safety
Pneumatic and Hydraulic Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Stored Energy Awareness
Stored Energy Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Machine Guarding Safety
Machine Guarding Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Workshop Safety
Workshop Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Portable and Stationary Power Tool Safety
Portable and Stationary Power Tool Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Welding, Cutting and Brazing Safety
Welding, Cutting and Brazing Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Compressed Gas Cylinder Safety
Compressed Gas Cylinder Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Abrasive Wheel / Grinder Safety
Abrasive Wheel / Grinder Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Battery Charging and Battery Room Safety
Battery Charging and Battery Room Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Electrical Arc Flash Awareness
Electrical Arc Flash Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Temporary Electrical Installation Safety
Temporary Electrical Installation Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Underground and Overhead Services Safety
Underground and Overhead Services Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Excavation Permit / Competent Person Training
Excavation Permit / Competent Person Training — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Demolition Safety
Demolition Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Concrete and Formwork Safety
Concrete and Formwork Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Temporary Works Safety Awareness
Temporary Works Safety Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Working Near Heavy Equipment
Working Near Heavy Equipment — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Forklift Operator Safety
Forklift Operator Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Telehandler Operator Safety
Telehandler Operator Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
MEWP Operator Safety
MEWP Operator Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Banksman / Vehicle Spotter Advanced Training
Banksman / Vehicle Spotter Advanced Training — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Lifting Appointed Person / Lift Planner
Lifting Appointed Person / Lift Planner — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Crane Signalman / Slinger
Crane Signalman / Slinger — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Mobile Crane Safety Awareness
Mobile Crane Safety Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Tower Crane Safety Awareness
Tower Crane Safety Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Defensive Driving
Defensive Driving — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Journey Management
Journey Management — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Road Safety and Fleet Safety
Road Safety and Fleet Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Fatigue Management
Fatigue Management — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Lone Working Safety
Lone Working Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Office Safety
Office Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Occupational Hygiene Awareness
Occupational Hygiene Awareness — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Respiratory Protection & RPE
Respiratory Protection & RPE — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Hearing Conservation
Hearing Conservation — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Eye and Face Protection
Eye and Face Protection — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Emergency Shower and Eyewash Safety
Emergency Shower and Eyewash Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Emergency First Responder
Emergency First Responder — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
CPR and AED
CPR and AED — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Fire Extinguisher Practical Training
Fire Extinguisher Practical Training — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Emergency Warden / Fire Warden
Emergency Warden / Fire Warden — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Emergency Incident Command System
Emergency Incident Command System — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Construction Safety for Managers
Construction Safety for Managers — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Construction Safety for Supervisors
Construction Safety for Supervisors — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
HSE Induction / General Site Safety
HSE Induction / General Site Safety — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
HSE Train-the-Trainer
HSE Train-the-Trainer — hazard identification, control selection, safe procedures, documentation and incident prevention on site.
Work at Height Awareness
Work at Height Awareness — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height User Training
Work at Height User Training — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Supervisor
Work at Height Supervisor — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Competent Person
Work at Height Competent Person — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Fall Protection Competent Person
Fall Protection Competent Person — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Fall Protection System Selection
Fall Protection System Selection — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Harness, Lanyard and Connector User Training
Harness, Lanyard and Connector User Training — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Anchor Point and Anchorage Systems Awareness
Anchor Point and Anchorage Systems Awareness — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Temporary Anchorage Installation & Inspection
Temporary Anchorage Installation & Inspection — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Horizontal Lifeline Safety
Horizontal Lifeline Safety — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Vertical Lifeline and Rope Grab Safety
Vertical Lifeline and Rope Grab Safety — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Self-Retracting Lifeline (SRL) User Training
Self-Retracting Lifeline (SRL) User Training — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Fall Clearance and Swing-Fall Assessment
Fall Clearance and Swing-Fall Assessment — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work Restraint Systems
Work Restraint Systems — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Personal Fall Arrest Systems
Personal Fall Arrest Systems — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Ladder and Stepladder Safety
Ladder and Stepladder Safety — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Portable Ladder User & Inspection Training
Portable Ladder User & Inspection Training — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Roof Work and Fragile Roof Safety
Roof Work and Fragile Roof Safety — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Roof Edge Protection
Roof Edge Protection — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Mobile Scaffold Tower User Training
Mobile Scaffold Tower User Training — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Mobile Scaffold Tower Erection & Inspection
Mobile Scaffold Tower Erection & Inspection — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
MEWP Work-at-Height Safety
MEWP Work-at-Height Safety — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Rescue Awareness
Work at Height Rescue Awareness — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Fall Arrest Rescue Technician
Fall Arrest Rescue Technician — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Suspension Trauma Awareness
Suspension Trauma Awareness — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Rope Rescue Fundamentals
Rope Rescue Fundamentals — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Advanced Work-at-Height Rescue
Advanced Work-at-Height Rescue — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Rescue Team Leader
Work at Height Rescue Team Leader — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Dropped Objects Prevention at Height
Dropped Objects Prevention at Height — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Tool Tethering at Height
Tool Tethering at Height — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Permit & Rescue Planning
Work at Height Permit & Rescue Planning — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Risk Assessment
Work at Height Risk Assessment — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Equipment Inspection
Work at Height Equipment Inspection — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Fixed Ladder and Vertical Access Systems
Fixed Ladder and Vertical Access Systems — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.
Work at Height Train-the-Trainer
Work at Height Train-the-Trainer — hazard control, equipment selection and inspection, rescue readiness and permit requirements for work at height.